About: Inspectors and flyouts provide detailed configuration and real-time information on any selected element while staying in the currently open view.
Not sure how to start?
→ Learn where to create and find outputs.
Inspect outputs
Inspecting an output is possible anywhere an output is displayed.
Option A: Opening a live signal
- Open a live signal.
- Select an output at the bottom.
Option B: Productions
- Go to productions.
- Select an output at the bottom or in the production inspector to open the output flyout.
Option C: Outputs
- Go to outputs.
- Select an output in the list on the left.
Output inspector
When an output is selected, the inspector at the right displays the configuration and real-time information of the output.
- Title: Displays the name and provides actions to edit, delete, and open the output.
- Routed signal: This shows the signal that is currently routed to the output and also allows removing the routing.
- Status: Offline, attention, or online. Attention points to a problem with a specific destination or when in a failover state (failover only available upon request).
- Configuration: Displays all major configurations for the output. The specific information displayed depends on whether you are looking at a passthrough or transcoded output.
- Resource locations: Displays all resource locations including their current status.
- Destinations: Displays all configured destinations including their current status.
Hint: Live Video Cloud avoids displaying redundant information. Hence information already displayed in more detail is not repeated in the inspector.
Output flyout
When an output is selected in an inspector, the flyout opens next to the inspector and displays configuration information.
- Title: Displays the status with name and provides an action to open output.
- Configuration: Displays all major configurations for the output. The specific information displayed depends on whether you are looking at a passthrough or transcoded output.
How to continue?